[Martha Weber]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
2. Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
3. Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.

Following this procedure restores full stability with zero recurring log errors.

iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | San Diego, CA

Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)

[Martha Weber]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Flushing local keychain daemon caches and re-authenticating with primary device lock screen passcode.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Confirm saved passwords exist locally on your iPhone in Settings > Passwords.
2. On Mac, turn Passwords & Keychain OFF in iCloud settings.
3. Purge local keychain cache: rm -rf ~/Library/Keychains/*/ && sudo killall -9 securityd secd.
4. Re-enable Keychain in iCloud settings and verify identity with iPhone lock screen passcode.

Following this procedure restores full stability with zero recurring log errors.

iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | San Diego, CA

Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)

[Author]

Posts