MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 15, 2026 at 3:35 pm in reply to: [Solved] MacBook Pro 14″ M2 Pro encountering MagSafe 3 Blinking Amber LED and Refusing to Charge after update (macOS Sequoia 15.1) #29584
Mason StevensCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
Apple Vision Pro (1TB) | Zeiss Optical Inserts | Austin, TXApple Certified Support Professional (ACSP) | Pro Audio Recording EngineerNovember 15, 2026 at 2:41 pm in reply to: [Solved] Mac Studio M1 Ultra encountering Thunderbolt 4 SSD Speeds Throttled to USB 3.0 after update (macOS Sequoia 15.1) #28727
Mason StevensCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
- Reset bus enumeration:
sudo killall -9 diskarbitrationd. - Enable APFS TRIM support:
sudo trimforce enable.
Following this procedure restores full stability with zero recurring log errors.
Apple Vision Pro (1TB) | Zeiss Optical Inserts | Austin, TXApple Certified Support Professional (ACSP) | Pro Audio Recording Engineer -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)