MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 15, 2026 at 11:21 pm in reply to: [Solved] Apple TV 4K Apple TV 4K eARC Audio Dropouts with Soundbar / AVR (tvOS 18.1) – Verified Troubleshooting #35553
Maxwell SimpsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
- In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
- In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Brisbane, QLDApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 5:37 pm in reply to: [Solved] MacBook Pro 16″ M3 Pro encountering External Display Flickering at High Refresh Rates after update (macOS Sequoia 15.0.1) #31264
Maxwell SimpsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking refresh rate to a fixed frequency, disabling Variable Refresh Rate (VRR), and regenerating WindowServer display plists.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- In System Settings > Displays, set Refresh Rate to fixed 120Hz or 100Hz instead of Variable (VRR).
- Reset display preferences:
sudo rm -f /Library/Preferences/com.apple.windowserver.displays.plist rm -f ~/Library/Preferences/ByHost/com.apple.windowserver.displays.*.plist killall -9 WindowServer - In monitor physical OSD menu, set DisplayPort mode to ‘DP 1.4 Standard’ without aggressive DSC overdrive.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Brisbane, QLDApple Certified Support Professional (ACSP) | HomeKit / Matter IoT IntegratorNovember 15, 2026 at 3:51 pm in reply to: [Solved] How to fix Compressor Batch Transcode Queue Stuck on ‘Waiting’ caused by Stale background Qmaster / Apple Qconsumer cluster lockfile on Mac Studio M1 Ultra #29718
Maxwell SimpsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Terminating orphaned qmaster processes and clearing compressor spool storage.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Force quit compressor daemons:
killall Compressor && killall qmasterd - Delete stale batch spool files:
rm -rf ~/Library/Application Support/Compressor/Storage/* - Relaunch Apple Compressor and submit batch job.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Brisbane, QLDApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator
Maxwell SimpsonCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
- On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
- In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M3 Max (36GB) | BenQ SW321C 4K | Brisbane, QLDApple Certified Support Professional (ACSP) | HomeKit / Matter IoT Integrator -
AuthorPosts