MappleCare Community
Paul Stewart
Find answers from other Apple users or start a discussion about your device.
Forum Replies Created
-
AuthorPosts
-
November 15, 2026 at 12:01 am in reply to: [Solved] Clean Energy Charging Pausing Battery at 80% Overnight on iOS 18.1: Diagnostic steps and permanent fix #15112
Paul Stewart
Certified Tech (Lvl 5)Apple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Disabling Clean Energy Charging toggle or overriding charging hold directly from lock screen.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Navigate to Settings > Battery > Charging Optimization.
- Toggle Clean Energy Charging to OFF.
- For an immediate top-off, long press the lock screen notification and select Charge to 100% Now.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Minneapolis, MNApple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro ArchitectNovember 14, 2026 at 10:59 pm in reply to: [Solved] How to fix Clean Energy Charging Pausing Battery at 80% Overnight caused by Regional carbon forecast algorithm holding battery level on iPhone 16 Pro Max #14040Paul Stewart
Certified Tech (Lvl 5)Apple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Disabling Clean Energy Charging toggle or overriding charging hold directly from lock screen.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Navigate to Settings > Battery > Charging Optimization.
- Toggle Clean Energy Charging to OFF.
- For an immediate top-off, long press the lock screen notification and select Charge to 100% Now.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Minneapolis, MNApple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro ArchitectNovember 14, 2026 at 10:53 pm in reply to: [Solved] Thunderbolt 4 SSD Speeds Throttled to USB 3.0 on macOS Sonoma 14.6.1: Diagnostic steps and permanent fix #13952Paul Stewart
Certified Tech (Lvl 5)Apple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
- Reset bus enumeration:
sudo killall -9 diskarbitrationd. - Enable APFS TRIM support:
sudo trimforce enable.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Minneapolis, MNApple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro ArchitectNovember 14, 2026 at 10:24 pm in reply to: [Solved] MacBook Pro 14″ M4 Pro Kernel Panic: Sleep Wake Failure (macOS Sequoia 15.1) – Verified Troubleshooting #13416Paul Stewart
Certified Tech (Lvl 5)Apple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Adjusting deep standby delay, disabling tcpkeepalive Wi-Fi wakes, and clearing corrupted PowerManagement plists.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Audit sleep blockers:
pmset -g assertions. - Configure recommended Apple Silicon sleep profile:
sudo pmset -a hibernatemode 3 sudo pmset -a standbydelayhigh 86400 sudo pmset -a tcpkeepalive 0 sudo pmset -a womp 0 - Flush power cache:
sudo rm -f /Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist && sudo killall -9 powerd. - Perform cold boot power controller sync: Shut down completely, wait 30s, and hold power button until Options appears.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 14″ M4 (32GB) | Studio Display | YubiKey 5C NFC | Minneapolis, MNApple Certified Support Professional (ACSP) | Enterprise Mac Sysadmin & Jamf Pro Architect -
AuthorPosts