MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 16, 2026 at 1:11 am in reply to: [Solved] Apple TV 4K encountering Apple TV 4K eARC Audio Dropouts with Soundbar / AVR after update (tvOS 18.0.1) #36440
Peter PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Replacing with certified 48Gbps Ultra High Speed HDMI cable and verifying eARC pass-through mode.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure HDMI cable is certified Ultra High Speed 48Gbps (HDMI 2.1); 18Gbps cables will dropout during Atmos MAT transmission.
- In tvOS Settings > Video and Audio > Audio Output, set Audio Format to Auto, Dolby Atmos.
- In TV HDMI CEC settings, ensure eARC is set to Pass-through / Bitstream, not PCM stereo.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Tokyo, JapanApple Certified Support Professional (ACSP) | Logic Pro DSP & Mixing EngineerNovember 15, 2026 at 4:14 pm in reply to: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 14″ M2 Pro: How to resolve SMC Power Delivery controller handshake fault #30040
Peter PerryCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Tokyo, JapanApple Certified Support Professional (ACSP) | Logic Pro DSP & Mixing Engineer -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)