[Roger Richter]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
2. Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
3. Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.

Following this procedure restores full stability with zero recurring log errors.

iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | Ottawa, ON

Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)

[Roger Richter]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Verifying certified 40Gbps active cables, resetting Thunderbolt kernel extensions, and enabling TRIM.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Verify cable has official Thunderbolt 4 lightning bolt and ‘4’ logo. Charging cables will not negotiate PCIe.
2. Reset bus enumeration: sudo killall -9 diskarbitrationd.
3. Enable APFS TRIM support: sudo trimforce enable.

Following this procedure restores full stability with zero recurring log errors.

iMac 24″ M3 (16GB) | AST 2 Diagnostic Station | ESD Workstation | Ottawa, ON

Apple Certified Support Professional (ACSP) | Apple Certified Service Technician (ACiT / ACSP)

[Author]

Posts