Skip to content
MappleCare Community ↗

MappleCare Community

Ruby Hughes

Find answers from other Apple users or start a discussion about your device.

All Forum Rooms

Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 15, 2026 at 12:38 am in reply to: [Solved] MacBook Pro 16″ M3 Max encountering Xcode Linker Error: ‘Undefined symbols for architecture arm64’ after update (macOS Sonoma 14.7 + Xcode 16.0) #15739
    Ruby Hughes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Inspecting binary slices via lipo, updating dependency architecture flags, and cleaning derived data.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Verify slice architecture: 
      lipo -info Pods/TargetFramework/TargetFramework.framework/TargetFramework
    2. In Xcode Build Settings, search for Excluded Architectures and ensure arm64 is NOT excluded for Any iOS/macOS SDK.
    3. Purge build cache: 
      rm -rf ~/Library/Developer/Xcode/DerivedData/* && xcodebuild clean

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M1 Ultra (64GB) | BenQ SW321C | Final Cut Pro 11 | Zurich, CH
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
    November 14, 2026 at 10:52 pm in reply to: [Solved] AirPods Pro 2 encountering AirPods Pro 2 Static Noise in Earbud During ANC Mode after update (Firmware 7B19) #13926
    Ruby Hughes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
    2. Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
    3. Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M1 Ultra (64GB) | BenQ SW321C | Final Cut Pro 11 | Zurich, CH
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
    November 14, 2026 at 10:17 pm in reply to: [Solved] Apple Pencil Pro Squeeze & Hover Gesture Failure on iPad Air 11″ M2: How to resolve Digitizer sensor BLE calibration handshake desynchronization #13296
    Ruby Hughes
    Community Contributor
    Apple Recommended / Verified Community Solution
    This canonical solution was verified and marked as solved in the Apple Support Community archive.

    Forgetting Bluetooth device, cleaning magnetic inductive strip, and recalibrating Squeeze threshold.

    Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

    1. In Settings > Bluetooth, tap (i) next to Apple Pencil and select Forget This Device.
    2. Wipe magnetic charging edge of iPad and flat edge of Apple Pencil with microfiber cloth.
    3. Force restart iPad (Vol Up, Vol Down, hold Top button). Re-attach Pencil to recalibrate.

    Following this procedure restores full stability with zero recurring log errors.

    Mac Studio M1 Ultra (64GB) | BenQ SW321C | Final Cut Pro 11 | Zurich, CH
    Apple Certified Support Professional (ACSP) | Final Cut Pro / DaVinci Colorist & Editor
  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)