MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
-
AuthorPosts
-
November 16, 2026 at 1:28 am in reply to: [Solved] Mac Studio M2 Max Local LLM / MLX Framework Unified Memory Allocation Out-of-Memory Panic (macOS Sonoma 14.7) – Verified Troubleshooting #36654
Samuel SandersCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Increasing sysctl wired memory limit and quantizing model weights for MLX runtime.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Increase sysctl wired unified memory limit:
sudo sysctl iogpu.wired_mem_limit=180000 - Load models using 4-bit or 8-bit quantization (e.g.
mlx-lm.generate --model mlx-community/Llama-3-70B-4bit). - Flush system unified cache before heavy inference passes:
sudo purge
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | CoreML & On-Device AI ResearcherNovember 16, 2026 at 12:55 am in reply to: [Solved] AirPods Pro 2 AirPods Pro 2 Static Noise in Earbud During ANC Mode (iOS 18.1) – Verified Troubleshooting #36404
Samuel SandersCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Deep cleaning outer black microphone mesh using dry adhesive putty and performing 15-second case reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Remove silicone ear tip. Press dry Blu-Tack adhesive putty firmly against the outer oval microphone grilles and pull away sharply.
- Place AirPods in case, close lid 30s. Open lid, hold back button for 15s until LED flashes amber, then white.
- Re-pair with iPhone. If noise persists, visit Apple Store for acoustic fixture testing.
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | CoreML & On-Device AI Researcher
Samuel SandersCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Locking Wi-Fi to a dedicated 5GHz/6GHz SSID, toggling AirPlay Receiver, and renewing Handoff tokens.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Ensure both Mac and Vision Pro are connected to the exact same 5GHz/6GHz Wi-Fi band without band-steering.
- On Mac, open System Settings > General > AirPlay & Continuity and toggle AirPlay Receiver off and on.
- In visionOS Control Center, bring Mac Virtual Display window within 2 meters, select Connect, and set resolution to Ultra-Wide (4K equivalent).
Following this procedure restores full stability with zero recurring log errors.
Mac Studio M2 Max (64GB) | LG UltraFine 5K | Stockholm, SwedenApple Certified Support Professional (ACSP) | CoreML & On-Device AI Researcher - Increase sysctl wired unified memory limit:
-
AuthorPosts