[Shirley Romero]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Flushing AudioUnit cache plist and triggering an isolated AU validation pass.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Quit Logic Pro and delete the corrupt cache:

   rm -f ~/Library/Caches/AudioUnitCache/com.apple.audiounits.cache

2. Kill core audio daemon:

   sudo killall -9 coreaudiod

3. Open Logic Pro, navigate to Settings > Plug-in Manager, locate the crashed AU plugin, and click Reset & Rescan Selection.

Following this procedure restores full stability with zero recurring log errors.

MacBook Pro 14″ M3 Pro (36GB) | Focusrite Clarett+ 8Pre | Beyerdynamic DT 1990 | Ottawa, ON

Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer

[Shirley Romero]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Re-calibrating eye tracking geometry, re-capturing Spatial Persona, and ensuring proper Light Seal seal.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Remove Light Seal and inspect internal infrared illuminator lenses; clean gently with Apple microfiber cloth.
2. Navigate to Settings > Eyes & Hands and select Recalibrate Eye Tracking.
3. Follow the multi-dot gaze target calibration keeping your head perfectly stationary until three confirmation chimes sound.

Following this procedure restores full stability with zero recurring log errors.

MacBook Pro 14″ M3 Pro (36GB) | Focusrite Clarett+ 8Pre | Beyerdynamic DT 1990 | Ottawa, ON

Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer

[Shirley Romero]

Apple Recommended / Verified Community Solution

This canonical solution was verified and marked as solved in the Apple Support Community archive.

Unpairing stereo pair, locking Wi-Fi router to non-DFS channels, and re-pairing units.

Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:

1. Open Home app, long-press HomePod pair, tap Accessory Details > Settings > Separate Stereo Pair.
2. In your Wi-Fi router admin panel, assign a fixed 5GHz channel (e.g. Channel 36 or 44) instead of Auto-DFS.
3. Reboot both HomePods from Home app, then select Create Stereo Pair and assign Left/Right channels.

Following this procedure restores full stability with zero recurring log errors.

MacBook Pro 14″ M3 Pro (36GB) | Focusrite Clarett+ 8Pre | Beyerdynamic DT 1990 | Ottawa, ON

Apple Certified Support Professional (ACSP) | Logic Pro Audio Producer & Mixing Engineer

[Author]

Posts