MappleCare Community
MappleCare Community Forums
Independent peer-to-peer Apple troubleshooting rooms • 100% English • Not affiliated with Apple Inc.
Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
AuthorPosts
-
November 15, 2026 at 10:18 pm in reply to: [Solved] MagSafe 3 Blinking Amber LED and Refusing to Charge on MacBook Pro 16″ M1 Pro: How to resolve SMC Power Delivery controller handshake fault #34613
Travis ElliottCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Completely discharging GaN brick capacitors, cleaning pogo pins with 99% IPA, and triggering PMU cold reset.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Unplug power brick from the wall and disconnect MagSafe cable. Wait 2 full minutes for capacitors to discharge.
- Clean the 5 gold spring-loaded pins with 99% isopropyl alcohol and a lint-free swab.
- Plug adapter directly to wall, connect MagSafe to Mac, and power on. The LED will illuminate steady amber.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Montreal, QCApple Certified Support Professional (ACSP) | Xcode Build Matrix ArchitectNovember 15, 2026 at 7:39 pm in reply to: [Solved] Restore Error {err} in Finder / iTunes on iPhone 15 Pro: How to resolve NAND communication timeout during early bootloader initialization #32369
Travis ElliottCommunity ContributorApple Recommended / Verified Community SolutionThis canonical solution was verified and marked as solved in the Apple Support Community archive.Direct Thunderbolt connection, forcing true DFU mode, and executing an in-place software update or Configurator revive.
Here is the exact step-by-step diagnostic and remediation procedure verified by Apple Certified Support Professionals:
- Never select ‘Restore’ if data is unbacked-up; always select Update.
- Use an authentic Apple USB-C 60W/240W cable connected directly to Mac ports (no hubs).
- Enter true black-screen DFU mode and execute an Apple Configurator Revive Device pass.
Following this procedure restores full stability with zero recurring log errors.
MacBook Pro 16″ M4 Max (128GB) | Studio Display 5K | Montreal, QCApple Certified Support Professional (ACSP) | Xcode Build Matrix Architect -
AuthorPosts
Viewing 2 posts - 1 through 2 (of 2 total)