How to Fix FileVault APFS Encryption Stuck at Estimating Time on MacBook Pro 14″ M2 Pro: Senior Engineer macOS Guide
⚡ Quick 60-Second Verdict: What This Issue Means
Your MacBook Pro 14″ M2 Pro has hit a known APFS conversion deadlock where the FileVault encryption process cannot calculate the remaining time because the volume’s conversion cursor has stalled—usually due to a snapshot metadata conflict or a background `kernel_task` deprioritization. The data is safe; the encryption engine simply needs a manual “nudge” via `diskutil` or a Secure Enclave handshake reset to resume the cryptographic conversion.
- DO NOT force shutdown during “Estimating…” — Cutting power while the APFS volume is in
Convertingstate can orphan the encryption rolling key, rendering the volume unmountable without a full erase. - DO NOT run third-party “disk repair” tools (e.g., DiskWarrior, TechTool Pro) on an actively converting APFS volume; they do not understand the FileVault key hierarchy and will corrupt the crypto metadata.
- AVOID connecting high-draw peripherals to the Lightning port while the CPU is crunching encryption math; the M2 Pro’s power budget prioritizes the Secure Enclave, and a brownout on the main rail will pause the conversion thread indefinitely.
- NEVER attempt to decrypt via Target Disk Mode on Apple Silicon—MacBook Pro 14″ M2 Pro does not support Intel-style TDM for FileVault volumes; you will see a blank disk image.
1. Immediate Safe Actions (Non-Destructive User Triage)
Three straightforward, non-destructive initial triage steps tailored specifically to FileVault APFS Encryption Stuck at Estimating Time on MacBook Pro 14″ M2 Pro:
Verify Conversion State via Terminal (Live Telemetry)
The GUI progress bar lies; the truth lives in diskutil. Open Terminal (Applications → Utilities) and run the command below. Look for Conversion Status: Converting and Conversion Direction: Forward. If you see Paused or None, the thread is deadlocked.
diskutil apfs list | grep -A 15 "FileVault"
Action: If Conversion Status: Converting is present but Size (Converted) hasn’t changed in 30+ minutes, proceed to Step 02. If it shows Complete but the menu bar icon spins, it’s a UI bug—log out and back in.
Kick the Encryption Daemon (fdesetup & corestoraged)
macOS Sonoma/Sequoia sometimes deprioritizes corestoraged (the APFS crypto daemon) under thermal pressure. We will gently restart the FileVault subsystem without rebooting the Mac.
- Open Terminal.
- Run:
sudo pkill -HUP corestoraged(enter admin password—no visual feedback). - Wait 15 seconds. Run:
sudo fdesetup status. - If output returns
FileVault is On. Encryption in progress: Percent = XX%, the thread has resumed. Watch the percentage for 5 minutes.
Pro Tip: Keep the Mac plugged into the Apple 8-pin Lightning connector (96W adapter minimum) during this. The M2 Pro’s performance cores need sustained 35W+ to crunch AES-XTS blocks efficiently.
Flush Local Snapshots Blocking the Conversion Cursor
APFS cannot move the encryption conversion cursor past a block pinned by a Time Machine local snapshot. This is the #1 cause of “Estimating Time Remaining: Calculating…” freezing at 0%.
- In Terminal, list snapshots:
tmutil listlocalsnapshots /. - If snapshots exist (e.g.,
com.apple.TimeMachine.2024-11-15-120000), delete the oldest first:sudo tmutil deletelocalsnapshots 2024-11-15-120000. - Repeat until list is empty.
- Immediately run:
diskutil apfs list / | grep "Conversion". TheSize (Converted)should jump within 60 seconds.
Why this works: The conversion cursor moves sequentially. A snapshot pins physical blocks, freezing the cursor. Removing the pin lets the cursor sprint.

2. Software False Alarm Recovery & Reset Protocol
MacBook Pro 14″ M2 Pro Hardware Reset Sequence (SMC / NVRAM Equivalent)
On Apple Silicon (M2 Pro), there is no user-accessible SMC or NVRAM reset. The “Hardware Reset” is a **Power Cycle with Secure Enclave Re-key**. This clears volatile key caches in the Secure Enclave Processor (SEP) that may be holding a stale encryption token.
- Save all work. Close lid completely. Wait 30 seconds (allows DRAM self-refresh to flush SEP mailbox).
- Open lid. Immediately press and hold Touch ID (Power) button for 10 full seconds until screen goes black (force power off).
- Wait 5 seconds. Press Touch ID once to power on.
- Unlock with password (not Touch ID) on first boot—this forces a full SEP key derivation.
- Open Terminal immediately:
diskutil apfs list / | grep "Conversion".
Critical: Ensure the Lightning connector is seated firmly during boot. The M2 Pro negotiates 20V/4.8A via the Lightning PD controller *before* spinning up the NAND controller for encryption resumption.
3. Advanced Diagnostics & Component Triage
Hardware Telemetry & Sensor Verification (NAND Health & Thermal)
If Steps 01-04 fail, the NAND controller may be reporting excessive ECC corrections, causing the APFS driver to throttle the conversion speed to near-zero to prevent uncorrectable bit errors.
- Open Console.app (Applications → Utilities).
- In the search bar (top right), type:
APFSand filter by Process: kernel. - Look for
APFS: encryption conversion throttled due to media errorsorIOAccelSurfacefaults. - Simultaneously, open Terminal and run:
sudo powermetrics --samplers smc -n 1 -i 1000. Check NAND Temperature and Media Error Count.
Thresholds: NAND Temp > 85°C triggers thermal throttle. Media Error Count > 500/hr indicates physical NAND degradation—backup immediately via Time Machine (unencrypted destination) and schedule logic board service. The M2 Pro’s unified memory architecture means NAND errors often look like memory pressure in vm_stat.

4. Diagnostic & Operating Parameter Matrix
| Diagnostic Indicator / Check | Expected Normal State | Fault Alert Threshold | Verified Resolution Target |
|---|---|---|---|
diskutil apfs list → Conversion Status |
Converting with active % increment every 1-2 min |
Paused, None, or % static > 15 min |
Resume Converting with > 5%/min throughput |
tmutil listlocalsnapshots / |
Zero snapshots on boot volume during conversion | Any snapshot present (pins conversion cursor) | Zero snapshots; conversion cursor unblocked |
| Console.app → kernel[APFS] logs | Silent or “conversion progress: XX%” | “throttled due to media errors” or “SEP key mismatch” | Clean log stream; no throttle messages |
| powermetrics → NAND Temperature | 45°C – 70°C under load | > 80°C (Throttle) / > 95°C (Emergency Halt) | Sustained < 75°C with fan RPM > 3000 |
| Lightning Port Power Negotiation (System Report → Power) | 96W (20V/4.8A) or 140W (28V/5A) PD 3.1 | < 60W (5V/3A or 9V/3A fallback) | Full 96W+ negotiated; “Charging Rapidly” badge |
fdesetup status Output |
Encryption in progress: Percent = XX% |
FileVault is On. (No progress line = stuck) |
Live percentage updating every 60s |
5. Frequently Asked Questions (FAQ)
Why does “Estimating Time Remaining” stay stuck at “Calculating…” even though the Mac isn’t hot?
The estimator relies on a rolling average of block conversion speed. If the conversion cursor is pinned by a local snapshot (Step 03) or the corestoraged daemon is deprioritized (Step 02), the speed sample is 0 KB/s. The math: Time = Remaining_Blocks / 0 = Infinity. The UI shows "Calculating..." instead of "Infinity." Fix the blockage; the estimate appears instantly.
Can I put the Mac to sleep or close the lid while FileVault is "Estimating"?
Absolutely not. On M2 Pro, sleep (S0ix) powers down the NAND controller and the AES-XTS engine in the Secure Enclave. If the conversion cursor is mid-block, the partial write is lost. On wake, APFS detects the torn write, marks the volume Dirty, and forces a full fsck_apfs -y which *restarts encryption from 0%*. Keep the lid open, display on, plugged into Lightning power.
I see "FileVault is On" in System Settings, but Terminal says "Conversion Status: Paused". Which is right?
Trust diskutil (Terminal). System Settings reads a cached preference plist (/Library/Preferences/com.apple.FileVault.plist) which updates only on successful milestone callbacks. The kernel/APFS driver (Terminal source) is the ground truth. "Paused" means the conversion thread has yielded the CPU and hasn't re-acquired it. Run Step 02 (pkill -HUP corestoraged) to force reschedule.
Does the MacBook Pro 14" M2 Pro need a specific charger wattage to finish encryption?
Yes. The M2 Pro's Flash Storage Controller (FSC) draws ~8-12W sustained during heavy AES-XTS writes. Combined with CPU (P-cores at 3.5GHz for crypto), the SoC package power hits 45-55W. A 60W charger (or 30W iPhone brick on the Lightning connector) forces the PMGR (Power Manager) to throttle P-cores to 1.8GHz, dropping encryption throughput by 60-70%. Use the included 96W (or 140W) Apple USB-C Power Adapter with USB-C to Lightning cable for full speed.
Share your OS version, device model, and exact error code in our independent peer Q&A rooms.
Comments